|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
SM1100C SERIES n n n CMOS COMPATIBLE WITH TRI-STATE OUTPUT SURFACE MOUNT OSCILLATORS IN PLASTIC PACKAGE LAND PATTERN COMPATIBLE TO OUR ENTIRE SM1100X SERIES AND EPSON SG615 STANDARD SPECIFICATIONS: Frequency Range Frequency Stability over Operating Temperature Range Operating Temperature Range Operable Supply Voltage (Vcc) Symmetry (Duty Cycle) (See next page for definition.) Input Current (Icc) & Rise and Fall Time (Tr & Tf) & Jitter Logic "1" & Logic "0" (See next page) Output Load Tri-state Output Packaging (see page R1, Figure 2) 1.000 MHz - 50.000 MHz (Consult factory for specific available frequencies) 50 PPM is standard, but 25 PPM is also available for certain frequencies. 0 - 70C is standard, but can be extended to -40 to +85C for certain frequencies 1.000 MHz - 30.000 MHz 30.001 MHz - 50.000 MHz SM1100CY SM1100CY SM1100CV 5 Volt 10% or 3.3 Volt 10% 5 Volt 10% only 3.3 Volt 10% only 40/60 - 60/40% is standard, but 45/55% symmetry at 50% of Vcc is also available. Depends on frequency and output load. See next page. 90% of Vcc MIN.; 10% of Vcc MAX. 15 pF is standard. Contact factory for heavier loads. Normal output when pin #1 is open (no connection); Normal output when pin #1 is at logic "1"; High-Impedance Output when pin #1 is at logic "0". 24 mm tape, 330 mm reel: 1000 parts per reel. For quantities <250: 23 parts per tube. PART NUMBERING GUIDE: n The Pletronics part number for an SM1100C series oscillator consists of the following 3 elements: 1. Overall Frequency Stability over Operating Temperature Range: SM1145C: 50 PPM; SM1144C: 25 PPM Optional Alphabet Designator for Special Requirement: SM1100CY: standard specifications; SM1145CE: operating temperature range of -40 to +85C; SM1100CS: 45/55% symmetry at 50% of Vcc; SM1100CV: operates at Vcc = 3.3V (only needed for over 30.000MHz) (There are other alphabet designators not listed here.) Frequency of Operation in MHz 2. 3. EXAMPLES: SM1145CV-50.000 MHz; SM1145CS-10.000 MHz; SM1144CE-50.000 MHz n When customer's requirements are non-standard, a special engineering part number will be assigned. (continued) Telephone: (425) 776-1880, Fax: (425) 776-2760, e-mail: ple-sales@pletronics.com O7A SM1100C SERIES Input Current (Icc), Rise and Fall time with 15pF Load & Jitter Frequency Range (MHz) 1.000 - 7.999 8.000 - 23.999 24.000 - 29.999 30.000 - 50.000 Icc (mA) Typical 5.0 8.0 10.0 25.0 Maximum 10.0 15.0 15.0 30.0 Tr & Tf (nS) Typical 5.5 5.5 4.5 2.5 Maximum 6.5 6.5 5.5 3.5 Period Jitter RMS Values (pS: 1 x 10-12 Sec) Typical Maximum 30.0 50.0 30.0 50.0 20.0 30.0 15.0 25.0 Waveform Recommended Test Circuit with CMOS Load * CL (Capacitive Load): Includes the input capacitance of oscilloscope. ** 0.01F external by-pass filter is recommended. Package Outline (NOT TO SCALE): PIN CONNECTIONS PIN 1 2 3 4 CONNECTION ENABLE/DISABLE INPUT GROUND OUTPUT Vcc INCHES (MILLIMETERS) January 2000 O7B Pletronics Inc., 19013 36th Ave. W., Suite H, Lynnwood, WA 98036-5761 USA |
Price & Availability of SM1100C |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |